The Hyper 9 controller must be cooled or it will overheat. This is a must-have item for any Hyper 9 build and is required when purchasing a Hyper 9 based kit.

The energy source that powers your vehicle. We can provide fully assembled Tesla battery modules, standalone Tesla 6.4kwh battery modules.

You can also use our brand new FELON modules for higher power applications or if you have more challenging space requirements.

Does your project require more than one size of battery box. Maybe you need to put some batteries in front and some more in the rear? Add an additional size of battery module.

These BMS systems ensure safe charging, discharging, and cell balancing, and integrate directly with Flash Drive’s control systems.

The onboard charger will allow you to recharge the high voltage battery pack.

The DC-DC Converter will keep the 12V battery charged.

We recommend a combo unit as it minimizes the space required for these components.

The brain of your conversion — the JIB-H9 system is a plug-and-play control hub that simplifies wiring across components—especially useful for DIY builders.

The JIB-HV simplifies the high voltage side of your conversion by providing a simple solution for the service disconnect switch, large HV fuse, and high voltage outputs for your onboard charger, climate control, etc.

These aluminum adapters allow seamless motor-to-transmission mating.

While we recommend the NACS (Tesla) charging port, the J1772 is still highly supported and standard. The NACS port is more compact and fits into smaller spaces.

Keep you batteries and controller cool with Liquid Cooling. This is mandatory for the Hyper 9 controller, but is optional for the battery modules depending on your climate. We include Liquid Cooling in all turn-key conversions. If you are already running liquid cooling for your controller, it is just a few tees to cool your batteries.